Multiplexers

Select between analog or digital input signals and forward to a single output line

STM-1, 63 E1

SDH MUX

Valiant’s offers STM-1 63 E1 (Optical / Electrical), Add-Drop SDH Multiplexer unit is a modular platform unit with two 155.52Mbps optical / electrical interfaces, which may be used in a point-to-point, chain or ring application to provide an ultra-compact, cost effective and flexible multi-service platform.

 

REQUEST INFORMATION

STM-1 Optical to

STM-1 Electrical Converter

Valiant Communications offers STM-1 Optical to STM-1 Electrical converter provides a simple and cost-effective conversion between STM-1 optical interface and STM-1 electrical interface. STM-1 Optical to STM-1 Electrical converter is an interface conversion equipment supplied with one STM-1 electrical (75 Ohms BNC) interface and one STM-1 optical (MSA compliant SFP) interface.

1+1, STM-1 Optical to STM-1 Electrical converter option is also offered and available.

 

REQUEST INFORMATION

STM-1 (Optical/Electrical)

Add-Drop Multiplexer

Valiant offers STM-1 (Optical / Electrical), E1 and Ethernet Multi-Service SDH Transmission Unit is a modular platform unit with two 155.52Mbps optical / electrical interfaces, which may be used in a point-to-point, chain or ring application to provide an ultra-compact, cost effective and flexible multi-service platform.

 

REQUEST INFORMATION

VCL-30

VOICE AND DATA MULTIPLEXER

The 2Mbps VCL-30, E1, Drop-Insert (Add-Drop) Multiplexer provides full range of POTS (voice) and digital data services to subscribers located at different locations, requiring to interconnect and establish a voice and data network over an E1 link. The VCL-30 is a simple, and yet a powerful channel bank for connecting and integrating analog communication equipment with digital E1 services.

 

REQUEST INFORMATION

VCL-1400

The VCL-1400, STM-16/64 SDH Multiplexer with MPLS-TP is a compact POTP platform which is targeted for deployment in the edge and access part of a transport network. It can be configured both as a TDM MSPP as well as a Packet Switch. It supports both TDM and Ethernet as Line Interfaces. It offers full redundancy and comes with an expansion chassis for deployment in high drop locations and can be used in point-to-point, linear, ring, T, and mesh networks.

 

REQUEST INFORMATION

VCL E1oP

Valiant offers a wide range of TDM over IP / TDM over Ethernet / TDM over Packet / TDM over MPLS transmission equipment with support for 2 E1 / T1, 8 E1 / T1, 16 E1 / T1, 32 E1 / T1 and E3 / DS3/T3 for TDM over IP, MEF or MPLS, TDM Pseudo-wire network applications.

 

The ‘VCL-E1oP’ E1 over Packet (32 E1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

 

REQUEST INFORMATION

VCL MX E1

Valiant’s offers its latest 160Mbps, 80 E1 fully non-blocking cross-connect at 64Kbps (DS-0) level (2480 DS-0 – any to any time-slot cross-connect), multi-service platform that may be used to provide a wide variety of voice and data services from single chassis. This product supports 1+1 E1 Link Protection / E1 Port Redundancy (8 E1’s per card), 1+1 Control Card Processor Redundancy, 1+1 Cross-Connect / TSI Redundancy, 1+1 Timing (Synchronization Clock) Redundancy. User selectable synchronization priority, 1+1 48V DC Power Supply Redundancy (Dual Power Input – allows the equipment to be powered from two separate sources, up to 144 FXO or 144 FXS voice channels per unit, up to 72 E&M 2-wire / 4-wire voice channels per unit and any “mix” of data and voice channels in a single unit.

 

REQUEST INFORMATION